*updated 6/24/11
Check out the full design page for this piece

You’ll notice that this ice sculpture design is very similar to another recent addition, the large Hanukkah menorah design. This is a scaled down version that might find more use than the large freestanding piece. This design can be cut from a single block if ice, with ice left over.



Again, the piece is designed to fit shorter candles that are 3 inches in diameter. When smaller diameter candles are used, cut appropriate size holes. Taller candles require deeper holes. In this case, the holes are only about an inch deep and appropriate for short candles. If very tall and large candles are used, the ice section can be made thicker to accommodate deeper holes. Make sure that no snow is left in the holes that would hinder placement of the candles.

Finally, whenever fire is involved, common sense precautions should be taken. Nothing flammable should be placed near the sculpture and the ceiling must be high enough for safety. Be sure that the menorah is standing straight and that the candles are sitting securely. Check periodically through the event that the candles are staying in place. If there’s any question at all about the safety of the piece, put out the candles or even take down the sculpture if necessary. Happy Hanukkah!

If you have any questions about this piece, email me or comment below. If you would like to use this ice sculpture design or any other design on this site, please check the design usage guidelines. The design collection page lists designs on the site.

You might also find photos and info from this entry on the ice carving secrets facebook page and you can comment there as well as below. Thanks!

Tags: Hanukkah, holidays